0202 RPET 2 CT CUPCAKE OR MUFFIN TRADITIONAL CELL HINGED CONTAINER (00046)

January 1, 2018 To Whom It May Concern: LINDAR Corporation polyester resin & sheet used to manufacture plastic containers FDA RPET, FDA RPET with Modifier, Bio-PET and APET are FDA CERTIFIED provided for thermoforming purposes meets the condition of use specified under 21CFR 177.1630 (f) (2) and 21 CFR 177.1315. For Europe, our Polyester complies with the compositional requirements of EEC Directives 90/128/EEC 92/39/EEC. Ethylene glycol, diethylene glycol, and terephthalic acid in the polyester are subject to control under the EEC Directives by specific migration from the final articles. Sincerely, Daniel K. Fosse Director of Packaging Sales January 1, 2018 To Whom It May Concern: This is to advise you that on January 3, 2002 FCN 000178 submitted by NatureWorks LLC to FDA became effective. This effective notification is part of list currently maintained on FDA’s website at http://www.cfsan.fda.gov/~dms/opa-fcn.html. PLA may be used in food packaging materials and, as such, is a permitted component of such materials pursuant to section 201(s) of the Federal, Drug, and Cosmetic Act, and Parts 182, 184, and 186 of the Food Additive Regulations in addition to 21CFR 177.1630 (f) (2) and 21 CFR 177.1315. This material is not intended for medical devices. The finished polymer is approved for all food types and the following use conditions were within the scope of the FCN: B.Boiling water sterilized C.Hot filled or pasteurized above 150oF D.Hot filled or pasteurized below 150oF E.Room temperature filled and stored (no thermal treatment in the container) F.Refrigerator storage (no thermal treatment in the container) G.Frozen Storage (no thermal treatment in the container) H.Frozen or refrigerated storage: Ready-prepared foods intended to be reheated in container at time of use. We urge all of our customers to perform GMP (Good Manufacturing Procedures) when constructing a package so that it is suitable for the end use. Again, for any application, should you need further clarification, please do not hesitate to contact me at (763) 689-2303 x204. I will be happy to assist you in any way possible. Sincerely, Daniel K. Fosse Director of Packaging Sales

Packaging – Food Contact