2012 Standard 500/cs (6120009)

We hereby confirm that the following chemicals are not present, to the best of our knowledge, in any of our products: Bisphenol A, B and C; diglycidyl ethers (BADGEs); Semicarbazide (SEM); Isopropyl thioxanthone (ITX); Epoxidized Soy Bean Oil (ESBO); Dioxins: Benzophenone (Diphenyl ketone); Chlorophenols; Chloranisoles: Bromoanisoles: PFOA (Perflourooctanoic acid): Triclosan (2,4,4'-trichloro-2'-hydroxydiphenyl ether); Epoxy derivatives: Latex: Melamine: Polyamides: Phthalates: Polycarbonates; Allergens; Endocrine, natural rubber, ozone depleting chemicals. Also, there is no styrene and its derivatives in our products. To the best of our knowledge and according to our suppliers’ declarations, none of the above chemicals is intentionally added to the raw materials. Based on the lack of these chemicals, there is no potential for migration into a food product packed in the trays. Also there are no other additives that may be of potential hazard. We confirm that our products CPET, PET and PP are totally free from any form of animal derived raw materials and additives. We hereby confirm that we fully comply with REACH regulation and our products do not contain SVHC (Substances of Very High Concern). There is no emission of toxic gases during heating a food product in CPET or PP trays. We do migration tests for our products with all kind of simulants at low and high temperatures according to EU Regulations and Directives and according to FDA requirements. These tests make sure that the total migration or total extractives values (at low and high temperature), are well below the limit values allowed by the mentioned health authorities. Also specific migration values of metallic elements (Al, Ba, Co, Fe, Cu, Li, Mn, Ni, Zn, Pb, Cd, Hg, Ni) is below the limits as specified in the regulation. These tests are performed every 2 years.

Packaging – Food Contact