Polypropylene, 5020, .00120 (5020-0120)

Oriented Polypropylene Film - Customer Fact Sheet Multi-Plastics 5020 Series Heavy Metals and CONEG Compliance Statement Multi-Plastics, Inc. hereby certifies that all MPI 5020 series films comply with the requirements of the toxics in packaging laws. Specifically: • We certify that the regulated metals of lead, mercury, cadmium, and hexavalent chromium were not intentionally added to any of our MPI 5020 series films during the manufacturing process. • We further certify that the sum of the incidental concentration levels of lead, mercury, cadmium, hexavalent chromium present in any MPI 5020 series film does not exceed 100 ppm by weight (CONEG model limit). These substances are also restricted or forbidden by provisions of EU Directive 2011/65/EU (the RoHS Directive Two) and EU Directive 2015/863 (the RoHS Directive Three) as well as EU Directive 94/62/EC on Packaging and Packaging Waste. FDA Compliance Statement Multi-Plastics, Inc. further guarantees that our MPI 5020 series films that are hereafter shipped or delivered to a purchaser, as of the date of such shipment of delivery and subject to the conditions of use or other restrictions if any, are not adulterated or misbranded within the meaning of the Federal Food, Drug, and Cosmetic Act, as amended. MPI 5020 series films also comply with the following Food and Drug Administration Regulations: • 21 CFR 177.1520 (c) (1.1) and (3.1): This regulation describes polypropylene and olefin copolymers that can be safely used in articles used for packaging or holding food at low temperatures and/or room temperatures. MPI 5020 series films can be used with all food types under conditions of use C through H. See 21 CFR 176.170, Tables 1 & 2 for details. • 21 CFR 178.2010: This regulation lists antioxidants and/or stabilizers for polymers which may be safely used for the manufacture of articles which come into direct contact with food. California Proposition 65 Statement MPI 5020 series films also pose no risk of cancer or reproductive hazards under the California Safe Drinking and Toxic Enforcement Act of 1986 (Proposition 65 - listed chemicals) directive and its amendments and therefore do not require a warning statement. Allergen Statement This is also to confirm that MPI 5020 series films do not contain any components based on/or derived from any known or potential allergen such as, but not limited to: 1. Peanuts 2. Tree nuts 3. Eggs or egg derivatives 4. Dairy or dairy derivatives 5. Wheat or wheat products 6. Soy or soy derivatives 7. Gluten from rye, oats and barley 8. FD&C/synthetic colors and dyes 9. Sulfites 10. Sesame/poppy/caraway seeds 11. Shellfish/fish 12. Crustacea 13. Corn or corn derivatives 14. Cottonseed products 15. Monosodium glutamate 16. Mustard 17. Celery products 18. Natural rubber latex 19. Genetically Modified Organisms (GMO’s) and/or ingredients derived thereof. Toxics Statement and Proposition 65 Compliance Multi-Plastics, Inc. also certifies that our MPI 5020 series films do not contain any of the following chemicals: BPA, BPS, PVC, chlorinated phenols, phthalates (DEP, DEHP, BBP, DINP, DBP, DIBP, DnHP, DNOP, DIDP, DPHP, DIUP, DTDP, DCHP), poly-chlorinated biphenyls (PCB), poly-brominated biphenyls (PBB) or poly-brominated biphenyl ethers (PBDE), polychlorinated triphenyls (PCT), decabromodiphenyls (DBDPO), polychlorinated dibenzoo-p-dioxins (PCDD), polychlorinated dibenzofurans (PCDF), polycyclic aromatic hydrocarbons (PAH), glyoxal, naphthalene (and/or naphthalene compounds), melamine, formaldehyde, diethanolamine (DEA), triethanolamine, benzophenone and 4-MBP, 2-ITX, anthraquinone, nonylphenol, nonylphenol ethoxylates, NPP, Tris (2,3-dibromopropyl) phosphate (TDBP), perchlorate, azo dyes, asbestos, BNST, octylphenolethoxylate-dimethylfumurate (DMF), fluorinated telomeric materials, vPvB, perfluorocarbon resins (PFC’s), PFAS, PFOA, PFOS, PFSA, PFCA, Dioxins and 1,4 dioxane, benzene, trichlorobenzene, tetrachloroethylene, octamethylcyclotetrasiloxane (D4), phenol, sulfur compounds, BHA, BHT, organotins (DBT and DOT), TBHQ, PVDC, parabens, styrene, mineral oil, nano-particle materials, optical brighteners, biocides, pesticides, fungicides, fumigants, radioactive substances, or any animal by-products. Non-Use of Halogen Substances This is to certify that MPI 5020 series polypropylene films meet all current standards for toxic materials and can be considered 100% Halogen Free including the absence of compounds of bromine and chlorine. There is also no intentional use of Red Phosphorus and Antimony Trioxide (Sb2O3) and/or content level exceeding 1000ppm in MPI 5020 series films. REACH Regulation (EC) No 1907/2006 Compliance Statement Manufacturers of MPI 5020 series films have provided statements to us that their film products ultimately exported to the EU by Multi-Plastics, Inc. are in full compliance with REACH. MPI 5020 series films are articles in terms of REACH definitions and are therefore exempt from registration. These products do not contain substances which are released under normal or reasonably foreseeable conditions of use (REACH Article 7 (1)). EU-Importers of our products are therefore relieved from any registration or notification obligations. These statements also include all Substances of Very High Concern (SVHC) as is defined in Article 57 of REACH. However, please be advised that we do not specifically test MPI 5020 series films for each of those substances as they are not intentionally added to our films and are not expected to be present at any levels above the threshold limits identified in REACH based on our detailed knowledge of all of the raw materials used in our film products. This guarantee is valid for all SVHC’s listed up to and including January 2021 including Annex 17, but Multi-Plastics does not test for these substances. Kosher Statement MPI 5020 series films are composed of synthetic and chemically inert materials of a high degree of purity and so they will not adversely affect the Kosher status of the food packaging products you are creating. Please contact your local Kosher certifying agency such as the Orthodox Union for assistance in this matter. Consumer Product Safety Improvement Act (CPSIA) Statement MPI 5020 series films comply fully with all relevant CPSIA safety rules and government guidelines. Conflict Minerals Statement Multi-Plastics fully supports the SEC and the recent Dodd-Frank Reform Act as a method to combat human rights abuses by the Democratic Republic of the Congo (DRC), and for making companies more accountable for buying suspect raw materials that directly aid corrupt militias. We are also pleased to report that no “conflict minerals” (tantalum, tin, gold, and tungsten) are used in the manufacture of MPI 5020 type OPP films. Clean Air Act Statement MPI 5020 series films do not contain and are not manufactured with ozone-depleting chemicals (Class I or Class II) under the Clean Air Act Amendments of 1990 nor require a warning statement related to such chemicals. MPI 5020 series films are produced in conformity with Regulation (EC) No. 2037/2000 of the European Parliament on substances that deplete the ozone layer and the Montreal Protocol ODS. Canadian EPA Batches 1-12 and Health Canada Cosmetic Hot List Statement None of the ingredients or sub-ingredients in MPI 5020 series films are included in Environment Canada’s June 2014 list of substances proposed for delisting from the Canadian Environmental Protection Act (CEPA) Domestic Substances List (DSL) nor in the Health Canada Cosmetic Hot List. Toy Safety Directive Statement MPI 5020 series films are not intentionally formulated with any substances listed in the EU Directive 2009/48/EC (Toy Safety Directive), Annex II, Section III Chemical Properties. These restricted substances include but are not limited to Arsenic, Antimony, Barium, Cadmium, Chromium, Mercury, Lead and Selenium. Cosmetic Products Safety Statement – EU Regulation No 1223/2009 MPI 5020 series films are compliant with the European product safety requirements of the New Cosmetic Directive 1223/2009 and specifically with Annex II and Annex III List of Substances Prohibited in Cosmetic Products. (EU Directive 1223/2009 replaces all provisions of EU Directive 76/78/EEC as of July 2013) European Biocidals Directive 528/2012 Statement (superseding EC 98/8/EC) MPI 5020 series films are compliant with EU Biocidals Directive 528/2012 and therefore do not contain subject chemicals of concern identified as active substances in that new directive. The information provided is believed to be reliable but it is meant only as a guide and is not intended to show compliance with any specific end use. It is the users responsibility to assess all application requirements and then to assure full compliance with all laws, regulations, and standards. This compliance certification for Multi-Plastics MPI 5020 shall remain in full force and effect for all shipments unless and until it is revoked in writing. Sincerely, Philip Pappajohn Director of Research & Development Multi-Plastics, Inc.

Packaging – Food Contact