Hot Melt Adhesive 1886BB (1886BB)

EN Not a hazardous substance or mixture. Contact with molten product will cause thermal burns. Vapor/fumes may be irritating at application temperatures. PRECAUTIONS: In case of fire: A solid stream of water may scatter molten product. Use water spray, foam, dry chemical or carbon dioxide. In case of spills: Allow molten material to solidify before disposal. HANDLING AND STORAGE: Material will burn in a fire. Avoid unnecessary exposure. Use extreme care while working with hot melts in their hot, fluid state. Avoid breathing vapors/fumes of heated product. Prevent contact with molten product. When material is heated, wear thermally insulating gloves to protect against thermal burns. Eye protection is not normally required. No respiratory protection normally required. Wear chemically resistant gloves to prevent prolonged or repeated contact. General room ventilatiom might be required under normal conditions of use. At the application temperature, use of local exhaust over the premelting reservoir is encouraged. FIRST AID MEASURES: EYES: Flush eyes to remove chemical. SKIN: Wash with soap and water. For hot material, immediately immerse the affected area with large amounts of cold water to dissipate heat. Do not attempt to remove material yourself. Get prompt medical attention. IF VAPORS INHALED: Remove individual to fresh air after an airborne exposure if any symptoms develop, as a precautionary measure. IF SWALLOWED: Seek medical attention if symptoms develop.

Packaging - Non Food Contact